Disclaimer: The information on this page has not been checked by an independent person.   Use this information at your own risk.

Click arrows to page adverts

Surface Texture Index Page
Drawing Page

Surface Finish (Texture) Symbols

Relevant Standard..

BS EN ISO 1302:2002 Geometrical product specifications (GPS). Indication of surface texture in technical product documentation

General indication of surface texture on drawings

For notes on surface roughness use link Surface Roughness Notes

Requirement for machining

Direction of lay

Machining Allowance

The Symbol indicates the surface finish requirements and shows a machining allowance requirement of 3mm on all surfaces.  

Symbol for surface texture all component surfaces

The Symbol indicates that all of the component surfaces are to be machined...

Location of Surface Texture Symbols

The shows typical locations for surface texture symbols...

Useful Links On Drawing/ Dimensioning
  1. Volvo Drawing Standards......For access to document 101-0005 on European-Standard-based drawing procedures

This Page is being developed

Surface Texture Index Page
Drawing Page

Send Comments to Roy Beardmore

Last Updated 19/01/2013